Behringer SRC2000 Manual do Utilizador descarregar pdf (Página 18)

EURORACK MX1804X

By a benign twist of fate, this is usually exactly want you (and they) want.

Input Source Routing Mic/Line Mono/Stereo

1 Vocals Alt 3-4 Mic Mono

2 Tape Main Mix Line Mono

3 Tape Main Mix Line Mono

4 Tape Main Mix Line Mono

5 Tape Main Mix Line Mono

6 Tape Main Mix Line Mono

7/8 Sampler 1 Main Mix Line Stereo

9/10 Sampler 2 Main Mix Line Stereo

11/12 Sampler 2 Main Mix Line Stereo

13/14 Sampler 4 Main Mix Line Stereo

Aux Return 1 ext. Effect Stereo

FX Return int. Effect Stereo

Tab. 4.3: Use of the inputs of your MX1804X

Input Application

Recording (multitrack) Alt 3-4

Aux Send 1 ext. Effect

FX Send int. Effect

Main Mix Recording (DAT)

Control Room out Monitor Speaker

Tab. 4.4: Use of the outputs of your MX1804X

4.3 Patchbay

A patchbay allows to patch the audio signals of most components in your studio from a central point and send

them to other units, which makes your entire cabling better structured and is indispensable for professional

work. If you want to use your studio as effectively as possible then it is preferable to use a complete patchbay

wiring scheme, but even less sophisticated patchbay solutions will benefit smaller studio configurations.

4.3.1 Patchbay configuration

The majority of commercially available patchbays include two rows with 24 phone jacks each in a 19" 1 U rack

panel. On the rear, either a corresponding number of phone jacks or contacts for soldering signal leads can be

found. Each group of four of these phone jacks forms one module. The configuration of some Patchbays can be

changed by inserting jumpers or turning individual modules.

With the help of our ULTRAPATCH PRO PX2000, an easy-to-use 24-patchbay offering phone jacks throughout,

you can easily understand the four different modes. With the ULTRAPATCH PRO you can select between the

four different operating modes simply by setting a switch on the upper panel (example: module 17):

4.3.2 Parallel

Fig. 4.1: Patchbay mode “parallel”

In this mode, all terminals of one module are interconnected. This configuration doesn’t make sense at first glance

4. APPLICATIONS

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 26 27

Sem comentários

Behringer SRC2000 Manual do Utilizador Página 18