Behringer SRC2000 Manual do Utilizador descarregar pdf (Página 26)

EURORACK MX1804X

8. MODIFICATIONS

The following modifications require you to do some soldering. Attempt only if you are experienced in using an

iron on PCBs. Otherwise, refer to qualified personnel.

+ After modification the BEHRINGER warranty becomes discretionary.

Links should not be threaded into holes on the PCB. They should be soldered to the tinned areas around the

holes, and bowed slightly upwards in between.

Mono channels: Aux send 2 > pre-fader

Mono channel Aux sends 2 are post-fader. If you want to convert them, carry out the modification described

below to each mono channel you want to be altered. The right PCB area is indicated by a yellow printing (see

figures below).

1) Switch desk off and disconnect it from the mains supply!

2) Cut the “post” track.

3) Add in a “pre” link.

Repeat for all mono channels you want to be modified.

Modification on Mono Channels

AfterBefore

Add a ´pre´ link

Cut the ´post´ track

PREPRE

AUXAUX

JPnJPn

POSTPOST

Fig. 8.1: Modifications on mono channels

8. MODIFICATIONS

1 2 ... 21 22 23 24 25 26 27

Sem comentários

Behringer SRC2000 Manual do Utilizador Página 26